Do I need a permit?
Fence Regulations in Victoria: Side Fences, Front Fences and When You Need a Permit
Before you build a new fence, know the rules
A new fence can transform the look, privacy and security of your property, but not every fence can be built without approval.
Fence requirements can vary depending on:
- Your council
- The location of the fence
- The height
- The materials used
- Whether your property is on a corner
- Planning overlays or restrictions on your land
At Crawfords Fencing, we help homeowners throughout Melbourne’s eastern suburbs understand their fencing options and recommend checking requirements before construction begins.
⸻
Side and Rear Boundary Fences
For most standard suburban properties, side and rear boundary fences are usually the simplest type of fence.
Common considerations include:
- The standard maximum height is often around 2 metres
- Both neighbours generally need to agree before replacing a shared dividing fence
- Special planning overlays or property restrictions may apply
Some councils, including Knox, state that side and rear boundary fences up to 2 metres generally do not require a building permit, while higher fences may require approval. ( Knox City Council )
However, every property is different, so it is important to check your local council requirements.
⸻
Front Fences
Front fences often have stricter requirements because they affect:
- Street appearance
- Neighbourhood character
- Driver visibility
- Pedestrian safety
Depending on your council and property, you may need approval for:
- Higher front fences
- Certain materials
- Corner properties
- Properties with planning overlays
For example, Knox Council notes that front fence requirements can vary depending on block size, location and height, with some front fences requiring permits. ( Knox City Council )
Whitehorse Council also highlights that front fences may require planning or building approval depending on height, location and property overlays. ( Whitehorse City Council )
⸻
Corner Blocks — Extra Rules Apply
Corner properties often have additional requirements because fences can affect visibility for drivers and pedestrians.
You may have restrictions near:
- Intersections
- Driveways
- Roadways
- Sight lines
Yarra Ranges Council, for example, outlines additional requirements for corner properties, including lower height limits near intersections. ( Yarra Ranges Council )
⸻
When Do I Need a Permit?
You may need a permit if:
- Your fence exceeds the allowed height
- You are building a front fence above council limits
- Your property has planning overlays
- You are on a corner block with visibility requirements
- Your fence uses certain materials or construction methods
- The fence is affected by easements or title restrictions
Always check before construction begins.
⸻
Replacing an Existing Fence
Many homeowners assume they can simply replace an old fence with a new one exactly the same.
Sometimes this is straightforward, but issues can arise if:
- The new fence is higher
- The fence location changes
- The property has restrictions
- The old fence was not compliant
A quick check before installation can prevent expensive changes later.
⸻
Crawfords Fencing Advice
Before choosing your fence, consider:
What height suits your property
Whether council approval is required
What style suits your home
Wind exposure and soil conditions
Long-term maintenance requirements
A good fence is not just about appearance — it needs to suit your property, your neighbours and local requirements.
Crawfords Fencing services Melbourne’s eastern suburbs and can help guide you through choosing the right fencing solution for your home.